|
Brother DR-620 Drum Reset Instructions This article will help you reset your printer for the Brother DR-620 Drum Brother DR 620 Reset InstructionsEvery time you install a new Brother DR-620 Drum you must manually reset the printer drum counter to 100% using the following instructions. After swaping the Brother TN-650 or TN-620 toner into the new DR 620 drum install the units in the printer and leave the front door to the printer open. For HL printers:
Press the Blue [Go] button until all the lights light up then release the button. Close the door and your printer drum life counter is reset to 100%.  For DCP and MFC printers:
With the printer door open press the [Clear/Back] button. The LCD screen will display 
Press [1] to reset the drum counter The LCD screen will display "Accepted" You may now close the printer door and your printer drum counter is set to 100% We hope you find this hepful Why the Brother DR-620 Drum and TN-650 Toner From 3R Inkjets and Toners?We take apart the used Brother DR-620 and clean all the gears, charging elements, and the transfer roller. The used drum roller is replaced with a new one every time. So you will receive a new TN650 drum unit every order. Get maximum yield from our professionally remanufactured Brother TN650. We have been building them for years the right way. The toner we fill the Brother TN 650 Cartridge with print so beautifully you won’t be able to tell the difference from the original. This high efficiency toner prints fine dark crisp lines and images from beginning to end.
|
